Removal and installation of the main cylinder. Nissan Micra (since 2002 of release)
Service and to Nissan Micra car repairs (since 2002 of release)
1. Introduction
2. Governing bodies and operation receptions
3. Settings and routine maintenance of the car
4. Engine
5. Systems of cooling of the engine, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Manual box of gear shifting and coupling
8.1. Manual box of gear shifting
8.2. Coupling
8.2.1. General information
8.2.2. Removal and installation of a pedal of coupling
8.2.3. Pumping of a hydraulic actuator of coupling
8.2.4. Removal and installation of the main cylinder
8.2.5. Removal and installation of the executive cylinder
8.2.6. Removal and coupling installation
9. Automatic transmission
10. Power shafts, rotary fists and stupichny assemblies
11. Brake system
12. Suspension bracket and steering
13. Body
14. Onboard electric equipment
15. Electric equipment schemes
 







f4fb234a

8-2-4-snyatie-i-ustanovka-glavnogo-cilindra.html

8.2.4. Removal and installation of the main cylinder

At work with brake liquid observe precautionary measures – it is poisonous!


 PERFORMANCE ORDER

  1. Pump out liquid of the tank of brake liquid and remove a hose from a nipple.
  1. Unhook a rod of the main cylinder from a coupling pedal.
  1. Take from the main cylinder a pin and disconnect a tube of a hydraulic actuator of coupling.
  1. Turn the main cylinder clockwise on a corner the 45th hail. also remove it.
  2. Installation is made upside-down. After installation adjust the provision of a pedal of coupling (see. Section Check of brake system and coupling).



8.2.3. Pumping of a hydraulic actuator of coupling

8.2.5. Removal and installation of the executive cylinder