Removal and installation of a pedal of coupling. Nissan Micra (since 2002 of release)
Service and to Nissan Micra car repairs (since 2002 of release)
1. Introduction
2. Governing bodies and operation receptions
3. Settings and routine maintenance of the car
4. Engine
5. Systems of cooling of the engine, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Manual box of gear shifting and coupling
8.1. Manual box of gear shifting
8.2. Coupling
8.2.1. General information
8.2.2. Removal and installation of a pedal of coupling
8.2.3. Pumping of a hydraulic actuator of coupling
8.2.4. Removal and installation of the main cylinder
8.2.5. Removal and installation of the executive cylinder
8.2.6. Removal and coupling installation
9. Automatic transmission
10. Power shafts, rotary fists and stupichny assemblies
11. Brake system
12. Suspension bracket and steering
13. Body
14. Onboard electric equipment
15. Electric equipment schemes
 







f4fb234a

8-2-2-snyatie-i-ustanovka-pedali-scepleniya.html

8.2.2. Removal and installation of a pedal of coupling

Adjustment of a pedal of coupling is described in the Section Check of brake system and coupling; Data for adjustment are specified in Specifications.


 PERFORMANCE ORDER

  1. Remove a part of furnish of the dashboard under a steering column (see. Head Body).
  1. Remove fixing of a tip of a rod of the main cylinder and disconnect it from a coupling pedal.
  1. Remove from an arm of a pedal of coupling the holder of electroconducting of the sensor of provision of a pedal of coupling.
  2. Separate the socket of the sensor of provision of a pedal of coupling.
  1. Give 3 nuts and remove assembly of a pedal of coupling.
  1. Installation is made upside-down.



8.2.1. General information

8.2.3. Pumping of a hydraulic actuator of coupling