Power supply system and production of the fulfilled gases. Nissan Micra (since 2002 of release)
Service and to Nissan Micra car repairs (since 2002 of release)
1. Introduction
2. Governing bodies and operation receptions
3. Settings and routine maintenance of the car
4. Engine
5. Systems of cooling of the engine, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
6.1. Power supply system
6.2. Systems of release and decrease in toxicity of the fulfilled gases
7. Systems of electric equipment of the engine
8. Manual box of gear shifting and coupling
9. Automatic transmission
10. Power shafts, rotary fists and stupichny assemblies
11. Brake system
12. Suspension bracket and steering
13. Body
14. Onboard electric equipment
15. Electric equipment schemes
 







43a38297

6-sistemy-pitaniya-i-vypuska-otrabotavshikh-gazov.html

6. A power supply system and production of the fulfilled gases

Specifications

Power supply system type The distributed consecutive injection, under control of ECM
Type of a control system of engines Nissan ECCS MPI-s
Turns of idling and corner of an advancing of ignition see. Specifications
Pressure in a power supply system on single turns, atm 3.5
Sensor MAP, B supply voltage 5
Target tension of the MAP sensor on single turns (the engine is heated-up), In 1.4 ÷ 1.5
Resistance of the IAT sensor depending on temperature, kiloohm
  • 25 hail.
1.9 ÷ 2.1
  • 80 hail.
0.31 ÷ 0.37
Resistance of the ECT sensor depending on temperature, kiloohm
  • 20 hail.
2.1 ÷ 2.9
  • 50 hail.
0.68 ÷ 1.00
  • 90 hail.
0.236 ÷ 0.260
Resistance a lambda probe (at temperature the 25th hail.), Ohm 3.3 ÷ 4.0
Resistance between contacts of the socket of the CMP and CKP sensor (at temperature the 25th hail.), Ohm except break and short circuit
Resistance э / the butterfly valve motor (at temperature the 25th hail.), Ohm 1 ÷ 15
Resistance of an injector (at temperature the 20th hail.), Ohm 12.1 ÷ 12.9
Resistance of the fuel pump (at temperature the 25th hail.), Ohm 1.0

Efforts of a tightening of carving connections, N • m

Efforts of a tightening of fixture also on сопр. illustrations.


Bandage tape of a fuel tank 28.4 ÷ 36.3
Tube of a jellied mouth of the fuel filter 15.8 ÷ 24.2
Lock ring of the fuel pump 55 ÷ 75
Forward section of an exhaust pipe to catalytic the converter and to the central exhaust silencer 43.1 ÷ 54.9
The central exhaust silencer to the main exhaust silencer 30.4 ÷ 39.2
Lambda probe 40 ÷ 50
Arm of forward section of an exhaust pipe 16.4 ÷ 20.7
Connecting wire of weight of system of release of OG 2.9 ÷ 4.9



5.2.13. Self-diagnostics automatic To/in

6.1. Power supply system