Settings and routine maintenance of the car. Nissan Micra (since 2002 of release)
Service and to Nissan Micra car repairs (since 2002 of release)
1. Introduction
2. Governing bodies and operation receptions
3. Settings and routine maintenance of the car
3.1. General information
3.2. General information about settings and adjustments
3.3. Schedule of routine maintenance
3.4. Check of levels of liquids, control of leaks
3.5. Check of a condition and replacement of hoses and tubes in an impellent compartment, localization of leaks
3.6. Replacement of impellent oil and oil filter
3.7. Check of an adjustment of headlights
3.8. Check of brake system and coupling
3.9. Check of a condition of system of production of the fulfilled gases
3.10. Check of a condition of components of a suspension bracket and steering
3.11. Check of a condition of protective covers of CV JOINTS of power shafts
3.12. AT and RKPP transmission oil replacement
3.13. Replacement of brake liquid and pumping of brake system
3.14. Replacement of spark plugs
3.15. Replacement of the salonny filter (ventilation system)
3.16. Replacement of a filtering element of an air purifier
3.17. Replacement of cooling liquid
3.18. Check of a condition of tires and pressure of their rating
3.19. Check of a condition of the battery and care of it
3.20. Check of a condition of a belt of a drive of auxiliary units and adjustment of its tension
3.21. Condition check, adjustment and replacement of brushes of screen wipers
4. Engine
5. Systems of cooling of the engine, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Manual box of gear shifting and coupling
9. Automatic transmission
10. Power shafts, rotary fists and stupichny assemblies
11. Brake system
12. Suspension bracket and steering
13. Body
14. Onboard electric equipment
15. Electric equipment schemes
 







43a38297

3-nastrojjki-i-tekushhee-obsluzhivanie-avtomobilya.html

3. Settings and routine maintenance of the car

Specifications

Types and volumes of applied greasings and liquids

Fuel type Unleaded AI-95 gasoline
Volume of a fuel tank, l 46
Type of impellent oil Oil for petrol engines, according to specifications: API SG, SH, or SJ ILSAC GF-I or GF-II ACEA 96 A2
Viscosity on SAE

The card of vyazkost of applied oils

* it is not recommended at frequent movement on high speeds
Volume of impellent oil, l
  • At oil replacement without the filter
2.8
  • At oil and filter replacement
3.0
  • Full volume
3.5
Type of cooling liquid Water solution (from 30 % to 50 %) and Nissan L250 concentrate
The volume of cooling liquid full//a broad tank, l
  • Models with RKPP and To/in
5.3/1.2
  • Models with AT and To/in
4.9/0.7
RKPP JH3 transmission oil type Original transmission Nissan oil, or oil according to the specifications API GL-4, SAE 75W-80 or 75W-85
Volume of the RKPP JH3 transmission oil, l 2.6
Type of transmission oil for (ATF) AT ATF Nissan, or Dexron III/Mercon ATF
ATF volume (together with the hydrotransformer) 7.7
Type of brake liquid FMVSS 116 DOT 4 or DOT 3 (DOT 4 and DOT 3 liquid mixing is not allowed)
Greasing of knots of a friction Konsistentny, NLGI N2 (lithium)
The pedals of a brake given for adjustment//couplings (see an illustration), mm
Free wheeling (A) 3 ÷ 11//2 ÷ 8
Height of the released pedal (H1), ± 5 mm 166 (176) *//168
Height of the squeezed-out pedal (H2) 80 (85) *//100
Gap between a rubber emphasis and carving end Д/В of stoplights (C) 0.74 ÷ 1.96/-
Maximum admissible люфт steering wheel, mm 35

* Models with AT

Engine

Pressure of check of system of cooling, atm 1.57
The pressure withheld by a cover of a radiator of system of cooling, atm
  • The standard
0.78 ÷ 0.98
  • The limiting admissible
0.59
Type of spark plugs
  • The standard
NGK LFR5AP-11 or Champion REC10PYC4
  • "Hot"
NGK LFR4AP-11
  • "Cold"
NGK LFR6AP-11
Interelectrode gap, mm 1.1

Data for check of belts of a drive of auxiliary units

W/P — the Water pump
ALT — the Generator
I/P — the Intermediate roller

C/P — the Cranked shaft
A/C — the To/in Compressor

Arrangement
Tension, N
The new
belt
At
to adjustment
Limit
Generator and To/in compressor belt
603 ÷ 691
495 ÷ 583
196
Generator belt
603 ÷ 691
495 ÷583
196
Belt of the water pump
446 ÷ 534
348 ÷ 436
137

Arrangement
Deviation when pressing with strength of 98.1 N, mm
Point
measurements
The new
belt
At
to adjustment
Limit
Generator and To/in compressor belt
A
6.6 ÷ 7.8
7.3 ÷ 8.5
13.8
B
5.6 ÷ 6.6
7.1 ÷ 8.3
11.9
Generator belt
A
3.1 ÷ 4.1
9.8 ÷ 10.6
13.8
Belt of the water pump
C
6.7 ÷ 7.3
7.6 ÷ 8.6
12.4
D
4.7 ÷ 5.6
7.0 ÷ 7.7
8.6

Efforts of a tightening of carving connections, N • m

Nuts of fastening of wheels 98 ÷ 118
Stopper of a drain opening of the pallet of a case of the engine and AT 29.4 ÷ 39.2
Jams of drain and control openings of RKPP 22
Oil filter 14.7 ÷ 20.5
Unions of pumping of brake system 10
Spark plugs 19.6 ÷ 29.4
Bolts of fastening of coils of ignition 3.8 ÷4.4



2.5.7. Trailer towage

3.1. General information