Removal and installation of locks of a cowl and hatch of a fuel jellied mouth. Nissan Micra (since 2002 of release)
Service and to Nissan Micra car repairs (since 2002 of release)
1. Introduction
2. Governing bodies and operation receptions
3. Settings and routine maintenance of the car
4. Engine
5. Systems of cooling of the engine, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Manual box of gear shifting and coupling
9. Automatic transmission
10. Power shafts, rotary fists and stupichny assemblies
11. Brake system
12. Suspension bracket and steering
13. Body
13.1. External equipment and body elements
13.1.1. Removal and installation of a fairing of a windscreen
13.1.2. Removal and installation of a decorative front grille
13.1.3. Removal and installation of moldings and consolidations
13.1.4. Removal and installation of a front bumper and forward spoiler
13.1.5. Removal and installation of a rear bumper
13.1.6. Removal and installation of a forward wing and loker
13.1.7. Removal and installation of basic beams of a radiator
13.1.8. Removal, installation and cowl adjustment
13.1.9. Removal and installation of locks of a cowl and hatch of a fuel jellied mouth
13.1.10. Removal, installation and adjustment of a door of a back and the components interfaced to it
13.1.11. Removal, installation and adjustment of lateral doors
13.1.12. Removal and installation of locks and handles of doors
13.1.13. Removal, installation and adjustment of assembly of the top hatch and its components
13.1.14. Removal, installation and repair of an external rear-view mirror
13.2. Salon equipment
14. Onboard electric equipment
15. Electric equipment schemes
 







f4fb234a

13-1-9-snyatie-i-ustanovka-zamkov-kapota-i-lyuchka-toplivnojj-zalivnojj-gorloviny.html

13.1.9. Removal and installation of locks of a cowl and hatch of a fuel jellied mouth

 PERFORMANCE ORDER


  1. For removal of the lock of a cover of the hatch of a fuel jellied mouth turn it counter-clockwise. For removal of a cable of a drive of the lock disconnect it from the lever.

1 — the Lever of unlocking of the lock of a cowl
2 — the Lever of unlocking of the hatch of a jellied mouth

  1. Remove front grilles (see. Section Removal and installation of a decorative front grille).
  2. Turn out bolts of fastening of the lock of a cowl (see the right bottom fragment on an illustration the Amount of installation of a cowl (mm)).
  3. Disconnect from the lock a cable and remove the lock.
  1. Remove a front bumper, turn out bolts, and remove an arm of the lock of a cowl.
  1. If necessary remove a cable of a drive of the lock as it is described below.
  2. Remove the top basic beam of a radiator and holders of a cable of a drive of the lock of a cowl in an impellent compartment.
  3. Remove the lever of unlocking of the lock of a cowl and disconnect from it a cable.
1 — the Lever of unlocking of the lock of a cowl
2 — the Lever of unlocking of the hatch of a jellied mouth

  1. Remove consolidation in a partition of an impellent compartment and extend a cable of a drive of the lock of a cowl from salon.
  2. Installation is made upside-down. At installation of an arm of the lock tighten bolts, since the bottom.



13.1.8. Removal, installation and cowl adjustment

13.1.10. Removal, installation and adjustment of a door of a back and the components interfaced to it