Removal and installation of basic beams of a radiator. Nissan Micra (since 2002 of release)
Service and to Nissan Micra car repairs (since 2002 of release)
1. Introduction
2. Governing bodies and operation receptions
3. Settings and routine maintenance of the car
4. Engine
5. Systems of cooling of the engine, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Manual box of gear shifting and coupling
9. Automatic transmission
10. Power shafts, rotary fists and stupichny assemblies
11. Brake system
12. Suspension bracket and steering
13. Body
13.1. External equipment and body elements
13.1.1. Removal and installation of a fairing of a windscreen
13.1.2. Removal and installation of a decorative front grille
13.1.3. Removal and installation of moldings and consolidations
13.1.4. Removal and installation of a front bumper and forward spoiler
13.1.5. Removal and installation of a rear bumper
13.1.6. Removal and installation of a forward wing and loker
13.1.7. Removal and installation of basic beams of a radiator
13.1.8. Removal, installation and cowl adjustment
13.1.9. Removal and installation of locks of a cowl and hatch of a fuel jellied mouth
13.1.10. Removal, installation and adjustment of a door of a back and the components interfaced to it
13.1.11. Removal, installation and adjustment of lateral doors
13.1.12. Removal and installation of locks and handles of doors
13.1.13. Removal, installation and adjustment of assembly of the top hatch and its components
13.1.14. Removal, installation and repair of an external rear-view mirror
13.2. Salon equipment
14. Onboard electric equipment
15. Electric equipment schemes
 







f4fb234a

13-1-7-snyatie-i-ustanovka-opornykh-balok-radiatora.html

13.1.7. Removal and installation of basic beams of a radiator

The top

Fixture of basic beams of a radiator

 PERFORMANCE ORDER

  1. Remove headlights (see. Head Onboard electric equipment).
  2. Remove assembly of the lock of a cowl and a lock arm (see. Section Removal and installation of locks of a cowl and hatch of a fuel jellied mouth).
  3. Remove from the top basic beam of a radiator clamps of a cable of a drive of the lock of a cowl and clamps of a sleeve of an air inlet.
1 — the Top beam
2 — the Sleeve
3 — the Cable
4 — the Air line
5 — Clamps
6 — the Cover
7 — the Clamp

  1. Uncover the tank of washing liquid and pull together down a tank mouth.
  2. Turn out boats and remove the top basic beam of a radiator (see an illustration Fixture of basic beams of a radiator).
  3. Installation is made upside-down.

The bottom

 PERFORMANCE ORDER

  1. Remove front grilles (see. Removal and installation of a decorative front grille) and clamps above air line.
1 — the Top beam
2 — the Sleeve
3 — the Cable
4 — the Air line
5 — Clamps
6 — the Cover
7 — the Clamp

  1. Remove the bottom clamps of a front bumper (see. Section Removal and installation of a front bumper and forward spoiler).
  2. Turn out screws, remove clamps and separate an overlay of a bumper from loker (see. Section Removal and installation of a front bumper and forward spoiler).
  1. Fix plaits a radiator and the To/in condenser on the top basic beam of a radiator.
  1. Turn out bolts (see an illustration Fixture of basic beams of a radiator) and remove the bottom basic beam.
  1. Remove the bottom clamps of an air line.
  1. Installation is made upside-down.



13.1.6. Removal and installation of a forward wing and loker

13.1.8. Removal, installation and cowl adjustment