Removal and stretcher installation. Nissan Micra (since 2002 of release)
Service and to Nissan Micra car repairs (since 2002 of release)
1. Introduction
2. Governing bodies and operation receptions
3. Settings and routine maintenance of the car
4. Engine
5. Systems of cooling of the engine, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Manual box of gear shifting and coupling
9. Automatic transmission
10. Power shafts, rotary fists and stupichny assemblies
11. Brake system
12. Suspension bracket and steering
12.1. General information, recommendations and security measures
12.2. Forward suspension bracket
12.2.1. Removal and installation, dismantling and assembly of a rack of a suspension bracket
12.2.2. Removal and installation of the cross-section lever of a suspension bracket
12.2.3. Removal and installation of the stabilizer of cross-section stability
12.2.4. Removal and stretcher installation
12.3. Back suspension bracket
12.4. Steering
13. Body
14. Onboard electric equipment
15. Electric equipment schemes
 







f4fb234a

12-2-4-snyatie-i-ustanovka-podramnika.html

12.2.4. Removal and stretcher installation

Components of installation of a stretcher are specified illustrations the Forward suspension bracket.


 PERFORMANCE ORDER

  1. Remove a rack of the stabilizer and disconnect the cross-section lever from a rotary fist.
  1. Give fixture of the steering mechanism and separate it from a stretcher.
  1. Remove the pendular lever (a back support) engine (see. Section Removal and installation of the power unit) and support of a pipe of system of release of OG.
  1. Turn out a bolt of the top draft from a body.
  2. To Poddomkratta a stretcher also turn out bolts of its fastening. Remove a stretcher together with the top draft, the cross-section lever and the stabilizer.
  3. Remove the top draft, the cross-section lever and the stabilizer from a stretcher.
  4. Installation is made upside-down. In summary check corners of installation of wheels.



12.2.3. Removal and installation of the stabilizer of cross-section stability

12.3. Back suspension bracket